A broken air conditioner is a stressful situation, especially since you’re considering whether you need a Puyallup air conditioning professional to come out. No one likes spending the money to have a professional take a look at their system, so before you call anyone, make sure to check these problems. You may be able to fix the problem on your own without spending a dime.
Thermostat
The thermostat is one of the most common problems you’ll have with an air conditioner. Make sure the thermostat wasn’t knocked out of position and the sensors near your coils are in the right place. Often times, a bumped sensor or a slightly off thermostat can cause this kind of problem and as a result, you’ll be left without steady cooling.
Check Your Filters
Another common problem that can cause issues with your air conditioner is filter clogging. While the system will continue to run with a clogged filter, there are a few issues that might pop up – it could smell funny or you might notice icing on the outside line (a major problem). If you allow the filter to get so clogged as to block the air flow from your system, you can expect a number of problems to crop up.
Blower Belts
Check the system’s blower belt for damage like cracking, excess slack or general wear. A blower belt that isn’t properly installed or that needs to be replaced will reduce air flow which can result in ice buildup or poor air flow – it will make it harder for your system to maintain a steady temperature.
Check the Outdoor Unit
Check to make sure nothing is blocking the outdoor unit. Clean the condenser coils and remove any debris that might have built up around the outdoor unit. Often, slowed air flow is caused by nothing more than leaves piled in front of your condenser.
If none of these problems is the culprit or if you fix them all and your system continues to struggle, it is time to call a Puyallup air conditioning professional like Sound Heating!