Sound Heating and Air Conditioning Inc. Blog: Posts Tagged ‘Heat Pump Maintenance’

Heat Pump Tips: Common Questions

Monday, January 23rd, 2012

Even if you installed a heat pump in your Issaquah home years ago, you may still have questions about the normal operation of your indoor and outdoor units. Here are answers to a few of the more common questions about heat pumps.

Do I need to schedule a heat pump maintenance visit before each season, or just once a year?

Scheduling a yearly maintenance visit is necessary to the proper upkeep and safe operation of your heat pump. This also extends the life of the system and helps it run more efficiently. However, scheduling a visit before the heating and cooling seasons isn’t necessary, unless you’ve had any concerns or issues with your heat pump.

Should I be concerned about the steam coming from my outdoor unit?

All heat pumps have a defrost cycle that melts the frost off of the outdoor coils in the winter. The steam rising from the outdoor unit results from the defrost cycle. If you notice that the defrost cycle lasts longer than ten to fifteen minutes, or if it cycles on and off frequently, you should call a service technician to look at your heat pump. There could be an issue with airflow that is affecting the compressor.

I just installed a heat pump. Why is my furnace running?

Many heat pump systems use the furnace fan blower to help distribute the heat throughout the house. Unless you’ve installed a geothermal heat pump, your furnace is most likely your backup heater, so it will kick on when the outside temperature drops below 20° F.

Is it really that important to clean my outdoor unit? It’s impossible to keep it clean all the time.

Yes, cleaning the outdoor unit is an especially important maintenance task. Not only does a routine cleaning of all the outdoor components maintain your heat pump’s efficiency and performance levels, it also prevents safety hazards. When you schedule a yearly maintenance visit with one of our technicians, cleaning the coils and outdoor unit is part of the service; however, if you want to clean the coils yourself, have one of our technicians show you how to do this before you attempt it on your own. You could suffer from electric shock if you are not familiar with the proper cleaning procedure. You can also help by making sure that the debris is cleared from around the outdoor unit.

If you have any questions about the heat pump in your Issaquah home, or if you’d like to schedule a maintenance appointment, give us a call any time.

Continue Reading

Guide from Sammamish: How to Maintain High Efficiency Filters to Reduce Stress on Your Heat Pump

Wednesday, December 14th, 2011

The filter on your heat pump is an integral part of your Sammamish home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your heat pump.

Continue Reading

What to Do About an Ice and Snow Covered Heat Pump in Tukwila

Monday, December 5th, 2011

It’s very common for heat pumps in Tukwila to ice over in the winter time. It can be due to freezing temperatures and icing outside or it could be due to constant running of the heat pump or excess moisture on the coils. However, while a bit of ice on the heat pump is relatively normal, the entire unit should never be covered in ice – such a thing is not only hard on the machinery; it can result in no heat for your home.

How to Handle Ice and Snow on the Heat Pump

Should your heat pump become covered in ice or snow in the winter time, there are a few things you can do and some things you should not do. First, check to make sure the problem isn’t related to a broken defrost cycle timer. The heat pump should go into a defrost cycle every 30-90 minutes to keep excess ice from building up. If this doesn’t happen, it should be inspected for a thermostat or sensor problem.

To actually remove the ice from the unit, never use a sharp object to pick the ice clear. You can easily damage the coils or another part of the unit and leave it permanently broken. The best way to remove ice from your heat pump is to rinse it off with a hose – even cold water will remove ice. Just be sure the defrost cycle is ready to come back on so the water used to rinse away the ice doesn’t freeze.

Remember to check your emergency heating source and make sure it is switched on while this is happening. Your heat pump likely won’t work properly while iced over and if it is left in the on position, excess stress on the device will cause damage.

To avoid this kind of damage, turn off the heat pump and turn on your emergency heating source, then clear away the ice and check the defrost timer. If everything works properly, turn the heat pump back on, but if you find any problems, call a heating contractor to do a more thorough inspection of the device before you use it again.

Continue Reading

How to Clean the Parts of a Heat Pump? A Question from Yelm

Friday, November 11th, 2011

It is very important to keep your heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your Yelm home’s maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Continue Reading

Heat Pump Maintenance: Some Pointers from Seatac

Friday, November 4th, 2011

Heating and cooling your Seatac home is a priority. You need your home and family to be comfortable all year round, so you either got or are considering a heat pump. These machines are great because under the right circumstances, they are essentially all-inclusive and incredibly efficient solutions for all your home heating and cooling needs.

Notice the “under the right circumstances” part. A number of things have to be considered when choosing a heat pump, such as the climate and the size of your home. But these are not the only circumstances that influence how well your heat pump works for you. Proper maintenance is a vital component of heat pump ownership, ensuring that you get the best performance out of your heat pump for the longest time possible.

A major part of properly maintaining any machine is to keep it clean. A heat pump is no exception. Dirt and dust can affect the efficiency of your heat pump, as well as speed up corrosion problems. Keep the compressor and coils clean. Check them monthly or so and remove any accumulated dirt. Also, consistently check and change filters according to the manufacturer’s recommendations.

Simple cleaning is an easy and effective first step to heat pump maintenance, but there are some things that you just won’t be able to do on your own. For more intensive maintenance, it is best to call in a professional for an annual inspection.

During a routine maintenance check of your heat pump, a technician will inspect the whole heat pump system for problems. He will clean the compressor and coils, tighten any connections that may have loosened up and change the filters as needed. In addition, a skilled technician will be able to detect any early signs of trouble and make necessary repairs to prevent break downs. These small repairs can prevent big problems later on, thereby preventing some serious discomfort and a possible big expense.

If you are considering a heat pump as a heating and cooling solution for your home, great. If you have already decided on one and had it installed, congratulations on making a smart decision. Now, make another smart decision to protect that investment by keeping your new heat pump properly maintained.

Continue Reading