Sound Heating and Air Conditioning Inc. Blog: Archive for September, 2011

How to Reduce the Load on Your Central Air Conditioner: A Guide From Renton

Wednesday, September 7th, 2011

Your central air conditioner can handle a lot. It can keep your Renton house cool and comfortable all summer long with only a minimum of maintenance. And if you have a newer, more energy efficient model, you probably are not even paying very much for this luxury. But no matter how good your air conditioning system is, it is always best if you can reduce its cooling load as much as possible.

Cutting down on the amount of work your central air conditioner has to do will save you money both in the short term and in the long term. You will be able to keep your house cool all summer while paying even less than you already do and you will help to extend the life of your system as well.

In general, reducing the cooling load that your air conditioner is responsible for involves keeping your house cooler by some other means. One great option when this is your goal is to have some ceiling fans installed. These help to circulate cool air and also create a breeze that can make it feel cooler even if the actual indoor temperature is the same.

With adequate ceiling fans in place, you will usually be able to turn up the thermostat on your central air conditioner and still be completely comfortable indoors. Turning up the temperature on the thermostat means that your air conditioning system will not have to work so hard because it will not have to get the indoor temperature down so low.

You can also reduce the indoor temperature in your house by blocking the sunlight that comes in and warms up the indoor air. Drawing the blinds, especially in those rooms that receive warmer afternoon sunlight will keep that sun from raising your indoor temperature. This, in turn, means that your air conditioning system will not have to work so hard to get the temperature back down.

You can also help to keep cool air inside and warmer air out by covering any doors and windows you are not likely to use with plastic. Also, check to make sure there are no cracks or drafts anywhere that may be letting in air from the outside or allowing cooler indoor air to escape. All of these things can make it possible for your air conditioner to keep your home cool without working so hard, and that will also mean that you will be paying less each month on your energy bills.

Continue Reading

Tags: , , , ,
Posted in Air Conditioning | Comments Off on How to Reduce the Load on Your Central Air Conditioner: A Guide From Renton

Why Select a Two Stage AC vs. Single Stage Air Conditioner: A Tip From Seatac

Monday, September 5th, 2011

When you are in the market for a new air conditioner in Seatac, one of the decisions you will have to make is whether you want a two stage system or one that only functions in a single stage. Of course, before you can make a decision about this, you need to know what all of this means.

A single stage air conditioning system is probably what you are most familiar with. They have been around for longer and can be found in a wide variety of locations. Single stage air conditioners come on at full capacity when the temperature in your home rises above the preset level on the thermostat. Once they have effectively cooled the house, these types of air conditioners shut off until the temperature works its way back up again.

Two stage air conditioners, on the other hand, can function at either 67% or 100% of capacity depending on exactly how warm it is in your home. What that really means is that if the temperature in your home is only a little above the thermostat’s preset limit, the air conditioning system will come on at 67% and gradually cool the house to keep it right in a comfortable range.

However, if you have not been home for a while and your home has gotten very warm inside, your air conditioner will come on at full power to get the temperature down quickly. What this really means is that your air conditioner will be running more than a single stage air conditioner because it will sometimes not be using all of its power to cool.

The end result of using a two stage air conditioner is that you will receive a relatively continuous flow of cool air throughout your home. A two stage air conditioner will send in a steady but smaller stream of cooled air as opposed to the large blast of cold air you would get from a single stage system.

This results in a more consistent and comfortable environment overall, and it also makes it possible for the air conditioning system to dehumidify your house more effectively. When the air is cooled too quickly, the dehumidification system does not always have time to do its job. But with the longer cooling cycles of the two stage system, there is plenty of time to make sure the right amount of humidity is removed from the air.

If you have more questions about which type of air conditioner is right for you, consult a professional.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on Why Select a Two Stage AC vs. Single Stage Air Conditioner: A Tip From Seatac

Who Invented Air Conditioning? Some History From Tumwater

Friday, September 2nd, 2011

For hundreds of years, people have been trying to figure out how to stay cool in the heat of the summer, even in Tumwater. But it wasn’t until 1902 that the first modern air conditioner was put into service in Brooklyn, NY. Since then, many adjustments and improvements have been made to make air conditioning available and convenient for people to use in their homes and cars. But through it all, the basic principles used in that first air conditioner have remained constant.

The Sackett-Wilhelms Lithographing and Publishing Company

The heat and humidity in New York in the summer isn’t something to be taken lightly, but it posed particular problems for the owner of the Sackett-Wilhelms Lithographing and Publishing Company. The conditions inside his facility were such that the paper used was warping and the dimensions fluctuating, causing the printing to constantly come out misaligned.

To try and solve this problem, he hired the Buffalo Forge Company, which itself had just hired Willis Haviland Carrier, a recent recipient of a Master’s Degree in Engineering from Cornell University. Carrier approached this problem by trying to find a way to cool air by passing it over cold coils in the same way air was heated in those days by passing it over hot coils.

As it turned out, this process worked to reduce both the temperature and the humidity in the area and Carrier’s first air conditioner began running at Sackett-Wilhelms in July of 1902.

The Next Steps

As the potential for this new technology became more and more apparent, demand for Carrier’s device grew in all sectors of the economy. Employers were delighted by the way air conditioners increased the productivity of their workers during the hottest months of the year, and in order to keep up with demand, Carrier eventually founded the Carrier Air Conditioning Company which still exists today.

The coolants used in the earliest air conditioners were generally either highly flammable or toxic, and often both. In order to make air conditioning safer and easier to use, a safer coolant needed to be introduced, which was what drove Thomas Midgley, Jr. to develop Freon in 1928. Freon was initially made up of chlorofluorocarbons (CFCs), but as the disastrous environmental impacts of those chemicals became apparent, usage shifted first to hydrogenated chlorofluorocarbons (HCFCs) and then to the hydrofluorocarbons (HFCs) that are predominantly used today.

If you have any questions about modern air conditioning, contact an air conditioning contractor.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on Who Invented Air Conditioning? Some History From Tumwater