Sound Heating and Air Conditioning Inc. Blog: Archive for September, 2012

Heating Guide: Furnace Control Boards

Monday, September 24th, 2012

One way to be a truly responsible homeowner is to familiarize yourself with the major systems and appliances in your home. By having at least some understanding of how, say, your refrigerator or toilet work, you gain understanding of how to use them efficiently and detect when something goes wrong.

The same is true of your Tacoma home’s furnace, which can appear to be a complicated piece of machinery. In order to help you get acquainted with your furnace, we will discuss one of its main control components, the furnace control board.

As the name suggests, furnace control boards are responsible for governing the operation of the furnace. At a minimum, a simple furnace control will control the furnace ignitor (e.g., a spark generator or glow coil), the gas valve and the furnace thermocouple, also called a flame sensor.

More complex furnace control boards will also have control over the blowers and/or the built-in diagnostic system.

To simplify things, you can think of the furnace control board as being a driver and the furnace as its car. Just as the driver oversees all the functions and operation of the car from ignition to shutting off the engine, likewise does the control board for the furnace.

A typical operation sequence for a furnace control board goes something like this:

  1. The control board receives a signal from the thermostat that the temperature is too low.
  2. It starts the ignition system, whether that be a spark generator, glow coil or pilot light.
  3. Once the ignitor is hot, the furnace control board initiates the flow of gas through the burners, where it is ignited.
  4. The control board keeps the furnace running until it is signaled by the thermostat that the temperature is now high enough, or until it detects something is wrong.

(An example of a malfunction where the control board would get involved is a thermocouple that is not detecting enough heat. In this case, the control board would shut off the gas flow to prevent a leak into the home.)

Furnace control boards are an essential part of your Tacoma home’s heating system. For any heating repairs in the Tacoma area, give Sound Heating a call!

Continue Reading

Heating Question: Is Your Furnace Not Blowing Enough Air?

Monday, September 17th, 2012

Have you ever been in your house in the winter, listening to your Puyallup furnace churn away trying to heat the house, but noticed that the whole place is still cold? If you checked the heating vents in this situation, you would probably find that there is not much air flow coming out of them, which is why you are still freezing.

It is entirely possible for the furnace to be burning away, producing hot air, without enough of that warm air ever actually being distributed through your home. So it continues to run and run, resulting in excess wear and tear on the heating system that will probably shorten its productive life, as well as keeping your whole home too chilly.

Why does that happen? There are a several common culprits for insufficient air flow from a furnace. Below is a list of the most frequent offenders, along with solutions for each:

  • Cause: Dirty or broken air filter. An air filter that has accumulated too much build up or is damaged will slow down air flow in a hurry.
    Solution: Clean or replace the air filter as necessary. This should be part of routine furnace maintenance in order to ensure efficient operation. Refer to the manufacturer’s recommendations to see how often you should check your air filter(s).
  • Cause: Damaged, corroded, broken or collapsed ductwork. Your ducts are like the road that warm air travels on. If the road is out, then no one can get through. Simple as that.
    Solution: Have a professional inspect and repair your ductwork. A routine ductwork check is also part of a professional’s annual maintenance inspection.
  • Cause: Blower fan not blowing enough. This can be caused by a loose fan belt, or a dirty motor.
    Solution: First, clean the blower fan and the area around it. It has to deal with a lot of air, so it naturally becomes dirty over time. If that doesn’t fix it, the fan belt probably needs to be replaced.

There are some other causes of improper furnace air flow, but those are the most common and easiest to detect and repair. If your heat registers are not returning any warm air at all, that is likely a different problem and you should call a Puyallup furnace technician at Sound Heating to look at the system right away.

Continue Reading

Heating Question: Why Is My Air Handler Squealing?

Monday, September 10th, 2012

Unusual noises coming from your expensive Seattle heating system never a good thing; they make you worry that something is wrong.

It’s true that an unusual noise does often mean that something needs to be fixed; however, a noise emanating from your HVAC system does not necessarily mean a major repair. You should always have a technician check out if you suspect a problem with your system, but not all problems are going to be expensive to fix.

One common noise that homeowners notice and complain about is a squealing noise originating in the air handler. Usually, this noise is coming from the fan belt that connects the blower fan and the motor. Over time, the belt can stretch out and become worn or misaligned, which makes it slip and generate that aggravating squealing noise.

So, while the squealing can be annoying and unpleasant, a slipping belt is by no means major. A belt is an inexpensive part and a Seattle heating technician can install it in just a matter of minutes.

As long as the noise is a squealing and not a grinding, this simple fix wil often take care of the problem. If you hear a grinding noise, however, immediately shut the unit down and call a technician. This may mean that your motor bearings are worn out and need to be replaced ASAP before further damage is inflicted on the motor itself.

For heating repairs you need in the Seattle area, give Sound Heating a call today!

 

Continue Reading

Your AC and Your Energy Recovery Ventilator

Tuesday, September 4th, 2012

As a Tacoma homeowner with an air conditioning system, you know that it costs plenty to keep your home cool and comfortable in the summer. It is an expense you are willing to pay for the comfort and overall health of your family, but if you are like most homeowners, you would do anything to lower your monthly electric bills where possible.

One way to make your air conditioning system a little more efficient is to install an energy recovery ventilator. Read on to learn what energy recovery ventilator is and how it works alongside your AC system to reduce energy loss and improve indoor comfort control.

What Is an energy recovery ventilator?

Not to be confused with a heat recovery ventilator, an energy recovery ventilator is a mechanical device that transfers heat and water vapor between the incoming (i.e. outside) air and outgoing air being moved by your ventilation system.

The main difference between an energy recovery ventilator and a heat recovery ventilator is that the former transfers both heat and moisture, while the latter transfers only heat.

What Does an energy recovery ventilator Do?

What does that transfer mean for your Tacoma air conditioning system? Well, in the hot summer months, your air conditioner pulls in warm air from the outside, cools it and then blasts it into your home, while exhausting warm air to the outside.

What an energy recovery ventilator does is make that process a little easier for the air conditioner to handle by transferring heat from the warm air coming in to the exhaust air that the AC is blowing out of the house. The incoming air therefore has to be cooled less, which means your AC doesn’t have to work as hard, which means less electricity is used.

Many users of energy recovery ventilator systems report that the moisture exchange also makes the air in their homes feel “fresher,” rather than the stale feel that air conditioning can sometimes produce.

So, if you would like to increase efficiency and reduce the cost of running your Tacoma AC system, consider an energy recovery ventilator as one possible solution. Call Sound Heating & Air Conditioning today to learn more!

Continue Reading